Canon 2000D/T7 setup
Battery
The first thing you should do is fully charge the battery. Everyone wants to put the battery in and take pictures right away, but you need to fully charge the battery first. By fully charging and then draining the battery as you use it, usage prolongs battery life. It only takes three or four hours. Then put the battery into the camera at the bottom of the camera. If you look at the battery you will see that there are electrical connectors on one end and there is a Canon logo on the battery so to position the battery correctly you have the connectors facing the camera and the logo facing you and it will. enters. Like most modern batteries, it only works one way, so if it doesn’t go in very easily, it’s most likely the other way around. When you go in you will click the clip at the bottom that keeps the battery in and when you want to take the battery out you just undo the clip and bounce back.
the memory card
The second thing you need to do is put in your memory card. Most professionals tend to use SanDisk memory cards because they offer a lifetime warranty on the card. However, it is worth keeping in mind that they will not replace the contents of the card. So if you have a 16 gigabyte card and it has 10 gigabytes of video and picture information on it and then it gets corrupted, they’ll just replace the card. It really is essential to have a place where you can save these images and videos permanently and safely, and that usually means an external hard drive. Just like the battery the card has electrical leads and it has the logo on the front and if you position it this way so the logo is facing you and goes into the little slot above the battery you can just slide it.
Lens Placement
The next thing to do is put on the lens. The Canon 2000D or Rebel T7 is an APS-C camera, which means it is a cropped frame camera. There are two types of 35mm DSLR cameras: full frame or cropped frame. The Canon EOS 2000D is a cropped frame camera, which means the sensor is slightly smaller and cheaper, as are the lenses. However, you can still take professional-quality photos and videos. This camera supports EF-S or EF lenses, but the recommended lens group for the Canon Rebel T7 is the EF-S lens group. When you change your lens, try to keep the camera tilted so dust and dirt don’t get into it. This is because the sensor inside the camera is very sensitive and if dust and dirt gets into it, it will damage the sensor and affect your photos and videos. It is also incredibly difficult to clean. So when you change lenses, try to do it quickly. On the side of the lens you will see a white square and if you look at the mount ring on the Canon T7 you will see a white dot. You just need to snap them together and turn the lens clockwise until you hear them click. Once you have clicked it means you are locked onto the camera and because it is an EF-S lens it can now communicate with the camera and thus help with auto focus and auto exposure.
The menus
When you want to access the camera menus it is very important to make sure you are in manual mode and the reason is that when you press the menu button all the menu tabs appear at the top. If you were on a different semi-auto or full auto option, when you press the menu options, not all the tabs appear at the top. When you turn on your camera for the first time, the screen will prompt you to set the date, time zone, and language. The date and time information will be added to the metadata of each image you take. You can change these details by using the cross keys and pressing set. Once you’ve set the time and date, you can set the date format to either the UK version or the US version. Once you’ve chosen the one you want, press that again and then you’re on to time. summer and continue with the time zone and region once everything is correct, you can simply press OK. If you want to go back at any time to change the time, date or language, you will find them in SETTINGS TAB 2.
Format your memory card
If you have a new card or a card you took from a previous camera, it is very important to format it so that the card and camera work together. The way to do it is by pressing the menu button and then go to SETUP TB 1 and here you can see the option to format the card. The important thing to remember here is that when you format the card, you will lose everything, even the images and videos you have protected will be deleted. So you need to know that everything on the card has been copied or is something you don’t want before you format your card. But if you’re happy to do that, click OK and it will format the card and prepare it for use with this camera.
diopter adjuster
The next thing to do is look through the viewfinder and see if what you can see through it looks sharp. If you don’t have 20/20 vision or wear glasses, although the camera’s autofocus makes the image absolutely sharp, when you look through the viewfinder it may appear out of focus. By using that diopter adjuster, which is right next to the viewfinder eyepiece, you can change the focus setting to match your eyesight. But remember that if you have the lens on autofocus, the camera will automatically focus the image even if it doesn’t look sharp to you.
monitor brightness
If you find that the brightness of the LCD monitor is too bright or too dark, you can change it by going to SETTINGS TAB 2. Click on the brightness of the LCD screen and choose to make it brighter or darker. However, remember that the optimal setting for checking exposure on the live view screen is level 4.
Auto power off setting
There’s nothing more irritating than the camera turning itself off when you’re still trying to compose a picture. While it helps save battery life, it can interrupt your train of thought and slow you down. You can change the time it takes for the camera to turn off by going to SETTINGS TAB 1 and choosing AUTO POWER OFF. Here you will see that you will be able to choose between 30 seconds and 15 minutes and you can turn it off completely if you wish. I think setting it to one minute is a good compromise.
ISO configuration
The ISO setting manages your sensor’s sensitivity to light entering the camera. To begin with, the Canon T7 will be on auto ISO settings, which is very convenient in most cases. You’ll want to control this at some point, though, not least because the ISO setting has a direct impact on the quality of your image. It is easy to control the ISO using the cross keys. Press the top one labeled ISO and the ISO options will appear on the LCD screen. As a general rule of thumb, ISO 100 to 400 is suitable for bright or sunny light, 400 to 1600 for cloudy or sunset, and 1600 to 6400 for low light and night shots.
File size and compression
The next thing to consider is file size and compression ratio. The Canon 2000D will capture a 24 megapixel file and that is a very high quality image. The JPEG compression rate will decide the quality of the image when it is stored on your memory card and also how many images you can save on your card. obviously it is better to choose the best compression rate to make the choice go to SHOOTING TAB 1 and go to the first option which is image quality. I prefer to choose a large file size and the best compression quality.
If you want more information, you may not take a look at our manual, which has been written especially for this camera. In fact, we’re giving away a sample of our manual. Contains 2 full course videos including the full video on how to shoot movies with the Rebel t7 all you have to do is click the link below and we’ll send it to you right away totally free.